Peugeot Expert Tepee

Automatic transmission fluid capacity & service interval

Peugeot Expert Tepee uses automatic transmission fluid with a capacity range of 4 to 7 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Expert Tepee 2.0 HDi (120 kW), RHH (2012-2015)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 4 liter (Service fill)
  • Code: AM6 6/1
Expert Tepee 2.0 HDi (120 kW), RHH (2011-2011)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 4 liter (Service fill)
  • Code: AM6 6/1

Additional Notes

  • The Peugeot Expert Tepee 2.0 HDi (120 kW) with RHH engine carries a dry fill capacity of 7 liters for the automatic transaxle, a figure that reflects the total fluid volume required when filling a completely drained or newly assembled unit.
  • The service fill capacity for the same automatic transaxle stands at 4 liters, representing the smaller volume needed when fluid is changed during routine maintenance rather than a full overhaul, as residual fluid remains in the torque converter and passages.
  • The 3-liter difference between the dry fill and service fill capacities on the RHH automatic transaxle underscores why distinguishing between the two values is critical when performing a fluid change versus a full rebuild or replacement.
  • Both the 2011 and 2012-2015 model year variants of the 2.0 HDi (120 kW) RHH share identical dry and service fill capacities of 7 liters and 4 liters respectively, indicating no revision to the automatic transaxle fluid volume specification across the covered production span.
  • All automatic transaxle fluid specifications for the Expert Tepee 2.0 HDi (120 kW) RHH across 2011-2015 are listed under normal use conditions, meaning the stated capacities apply to standard operating environments rather than severe-duty cycles.

Other Systems