Peugeot 508 II, R8
Coolant capacity & service interval
Peugeot 508 II, R8 coolant capacity ranges between min and max values. Service intervals include normal use. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 508 II Hybrid4 360, 5GB (2019- ) |
|
| 508 II 1.2 PureTech 130, HNS (2018- ) |
|
| 508 II 1.6 THP 150, 5GX (2018-2021) |
|
| 508 II 1.6 THP 165, 5GY (2018-2021) |
|
Additional Notes
- All four configurations listed for the Peugeot 508 II carry a coolant specification of "between min and max," which refers to topping up the reservoir to a level within the marked minimum and maximum indicators rather than filling to a fixed measured volume.
- The 1.2 PureTech 130 (HNS) and the Hybrid4 360 (5GB) share the same "between min and max" fill guidance as the two 1.6 THP variants, meaning no single engine family in the listed data calls for a distinct measured capacity over another.
- The 1.6 THP 150 (5GX) and 1.6 THP 165 (5GY) are both covered across the 2018-2021 model years, while the 1.2 PureTech 130 (HNS) carries a start year of 2018 and the Hybrid4 360 (5GB) carries a start year of 2019.
- The Hybrid4 360 (5GB) is the only electrified configuration in the listed data, and its cooling system specification follows the same "between min and max" guidance applied to the purely combustion-engined variants, indicating no separate measured fill volume is listed for the hybrid powertrain's thermal management circuit.
- All four entries are classified under normal use conditions, meaning the coolant level guidance listed applies to standard operating environments rather than a severe-duty or first-change scenario.