Peugeot 505
Power steering fluid capacity & service interval
Peugeot 505 power steering fluid capacity is 0,65 liter. Service intervals consist of a check every 20000 km. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 505 1.8 (1985-1991) |
|
| 505 2.0 (1985-1991) |
|
| 505 D 2.5 (1985-1991) |
|
| 505 Injection (1985-1991) |
|
| 505 TD 2.5 (1985-1990) |
|
| 505 Turbo Injection (1985-1988) |
|
Additional Notes
- The Peugeot 505 power steering system holds 0.65 liter across all six listed configurations, spanning the 1.8, 2.0, 2.5 diesel, 2.5 turbodiesel, fuel-injected, and turbocharged injected variants. A capacity at this level is characteristic of a rack-and-pinion or recirculating-ball hydraulic assist reservoir rather than a full system overhaul volume.
- The 0.65 liter figure represents the fluid reservoir capacity, meaning the volume available for top-up and routine service rather than a complete drain-and-refill of all hydraulic lines and the pump itself.
- All configurations share a 20,000 km check interval under normal use conditions. A check interval, as opposed to a change interval, means the fluid level and condition are inspected at that mileage point rather than the fluid being replaced on a fixed schedule.
- The normal use condition tied to the 20,000 km check applies uniformly across petrol and diesel variants alike, including the turbocharged 505 Turbo Injection (1985-1988) and the 505 TD 2.5 (1985-1990).
- The 505 Turbo Injection covers the years 1985-1988, a shorter production window than the 1985-1991 span seen in the 1.8, 2.0, diesel, and standard injection variants, yet the power steering capacity and service interval remain identical.
- The 505 TD 2.5 runs from 1985-1990, one year shorter than most other configurations in the lineup, while still sharing the same 0.65 liter capacity and 20,000 km check specification.