Peugeot 504

Manual transmission fluid capacity & service interval

Peugeot 504 manual transmission fluid capacity ranges from 1,15 to 1,2 liters. Service intervals include a check at 5000 km and a change at 10000 km. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
504 Diesel (1971-1980)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
504GL (1971-1980)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
504Ti (1971-1980)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1
504 (1968-1980)
  • Use: Normal
  • Capacity 1,15 liter
  • Check 5000 km
  • Change 10000 km
  • Code: 4/1

Additional Notes

  • The Peugeot 504 (1968-1980) base configuration carries a manual transmission fluid capacity of 1.15 liters, which represents a service fill volume rather than a full overhaul or dry-fill figure.
  • The 504 Diesel, 504GL, and 504Ti variants, all spanning 1971-1980, share a slightly higher manual transmission fluid capacity of 1.2 liters, placing them above the base model's 1.15-liter specification.
  • The 0.05-liter difference between the base 504 and the three 1971-1980 variants is a small but distinct split in capacity, likely reflecting differences in gearbox design or internal volume across configurations.
  • All four configurations share a uniform fluid check interval of every 5,000 km under normal use conditions, meaning the check schedule does not vary by engine type or trim level.
  • The fluid change interval across all listed configurations is 10,000 km under normal use conditions, applying equally to the base petrol, diesel, GL, and Ti variants.
  • The 5,000 km check interval paired with a 10,000 km change interval means a fluid level inspection falls at the midpoint of each full drain-and-fill cycle across all configurations.

Other Systems