Peugeot 4007

Automatic transmission fluid capacity & service interval

Peugeot 4007 automatic transmission fluid capacity ranges from 5,5 to 7,6 liters. Service intervals occur every 30000 km or 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
4007 2.2 HDi DPF, 4HN (2012-2012)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 5,5 liter (Service fill)
  • Change 30000 km/ 36 months
  • Code: Getrag DCS6 6/1
4007 2.2 HDi DPF, 4HN (2009-2011)
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 5,5 liter (Service fill)
  • Change 30000 km/ 36 months
  • Code: Getrag DCS6 6/1

Additional Notes

  • The Peugeot 4007 2.2 HDi DPF with the 4HN engine carries a dry fill capacity of 7.6 liters, which reflects the total fluid volume required when filling a completely drained or rebuilt transaxle assembly from empty.
  • The service fill capacity of 5.5 liters is notably lower than the dry fill figure, indicating that a standard fluid change does not fully evacuate the transaxle, leaving a residual volume retained within the unit during normal servicing.
  • The difference of 2.1 liters between the dry fill and service fill values represents fluid held in areas such as the torque converter or internal passages that are not reached during a routine drain procedure.
  • The 2009-2011 and 2012 model year variants of the 4007 2.2 HDi DPF share identical capacity figures and change intervals, with both specifying 7.6 liters dry, 5.5 liters service fill, and a change interval of 30,000 km or 36 months under normal use conditions.
  • The 30,000 km or 36-month change interval applies specifically under normal use conditions, meaning the interval is tied to whichever threshold is reached first in everyday driving circumstances.
  • The transaxle designation indicates the automatic transmission and drive axle are housed in a combined unit, which is a common configuration in front-wheel-drive and all-wheel-drive vehicles and directly influences the fluid capacity figures listed.
  • The semi-automatic classification of the transaxle in the 4007 2.2 HDi DPF distinguishes the unit from a fully conventional automatic, and the 5.5-liter service fill capacity applies specifically to fluid changes performed on a semi-automatic transaxle of this type.

Other Systems