Peugeot 308 III

Manual transmission fluid capacity & service interval

Peugeot 308 III manual transmission fluid capacity ranges from 1,7 to 1,9 liters. Service intervals include normal use. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
308 III 1.2 PureTech 110, HNP (2021- )
  • Use: Normal
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
308 III 1.2 PureTech 130, HNS (2021- )
  • Use: Normal
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
308 III 1.5 BlueHDi 130, YHZ (2021- )
  • Use: Normal
  • Capacity 1,9 liter
  • Code: ML6C 6/1

Additional Notes

  • The Peugeot 308 III 1.2 PureTech 110 (HNP) and 1.2 PureTech 130 (HNS) share an identical manual transaxle fluid capacity range of 1.7-1.8 liters, while the 1.5 BlueHDi 130 (YHZ) carries a fixed capacity of 1.9 liters.
  • A capacity expressed as a range, such as the 1.7-1.8 liter figure on the two PureTech petrol variants, typically reflects normal variation between a drain-and-refill service fill and a full overhaul or dry fill measurement.
  • The 1.9-liter fixed capacity on the 1.5 BlueHDi 130 transaxle is 0.1-0.2 liters greater than the PureTech petrol units, a difference consistent with the generally larger gearbox housings associated with diesel powertrains.
  • All three configurations carry a normal use condition designation, meaning the listed capacities apply to standard operating environments rather than severe-duty cycles.
  • The transaxle designation across all three variants indicates a combined gearbox and differential assembly, which is why a single fluid fill figure covers both functions in each specification row.

Other Systems