Peugeot 308 CC
Power steering fluid capacity & service interval
The Peugeot 308 CC uses power steering fluid with a capacity of 1.2 liter. The data covers 5 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
| 308 CC 2.0, RFJ (2007-2011) |
|
Additional Notes
- The Peugeot 308 CC 2.0 RFJ (2007-2011) carries a power steering fluid capacity of 1.2 liters, which represents a conventional hydraulic system reservoir fill volume.
- All 308 CC variants equipped with electro-hydraulic power steering (EHPS) specify a fluid level maintained between the minimum and maximum marks rather than a fixed volumetric capacity, reflecting the sealed or semi-sealed nature of EHPS reservoirs.
- The 1.6 GTI THP with engine codes 5FB and 5FU uses EHPS across both the 2010-2011 and 2012-2014 model year ranges, with the same min-to-max fill specification applying to both periods.
- The 2.0 HDi (120 kW) DPF with engine code RHH also carries the EHPS designation and the min-to-max specification across its 2009-2011 and 2012-2014 ranges, consistent with the petrol EHPS variants.
- The conventional hydraulic power steering system on the 2.0 RFJ is the only configuration in the 308 CC lineup to carry a stated volumetric capacity, making the 1.2-liter figure specific to that engine and model year range.
- All specifications listed apply under normal use conditions, meaning the fluid level and capacity figures are not adjusted for severe operating environments in any of the configurations covered.