Peugeot 206 CC

Manual transmission fluid capacity & service interval

Peugeot 206 CC manual transmission fluid capacity ranges from 1,9 to 2 liters. Service intervals include 24 months or 30000 km and 60000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
206 CC 1.6 HDi, 9HZ (2005-2008)
  • Use: Normal
  • Capacity 2 liter
  • Check 60000 km
  • Code: BE3/5 5/1
206 CC 1.6 16V, NFU (2000-2008)
  • Use: Normal
  • Capacity 2 liter
  • Check 24 months/ 30000 km
  • Code: MA5/S 5/1
206 CC 2.0 16V, RFN (2000-2008)
  • Use: Normal
  • Capacity 1,9 liter
  • Check 24 months/ 30000 km
  • Code: BE4/5 5/1

Additional Notes

  • The Peugeot 206 CC 1.6 16V (NFU) and 1.6 HDi (9HZ) transaxles share a 2-liter manual transmission fluid capacity, while the 2.0 16V (RFN) transaxle holds a slightly lower 1.9 liters.
  • A capacity figure listed for a manual transaxle typically represents a service fill, meaning the amount needed when draining and refilling during routine maintenance rather than a full overhaul rebuild quantity.
  • The 1.6 16V (NFU) and 2.0 16V (RFN) variants carry a check interval tied to both time and distance under normal use conditions, set at 24 months or 30,000 km, whichever comes first.
  • The 1.6 HDi (9HZ), available from 2005, carries a distance-only check interval of 60,000 km under normal use conditions, which is double the 30,000 km distance threshold applied to the petrol variants.
  • The 2.0 16V (RFN) transaxle capacity of 1.9 liters is 100 ml less than the 2-liter figure shared by both 1.6-engined variants, a difference that is small but relevant when measuring and preparing fluid for a service fill.
  • All three configurations are noted specifically as transaxle units, meaning the manual gearbox and final drive share a common fluid sump, which is why a single capacity figure covers the entire assembly.

Other Systems