Opel Manta A
Coolant capacity & service interval
Opel Manta A coolant capacity ranges from 5.1 to 7.2 liters depending on configuration. Six configurations are covered in the data.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Manta 1.9 GT/E (1974-1975) |
|
| Turbomanta (1973-1975) |
|
| Manta 1.2 S (1970-1975) |
|
| Manta 1.6 (1970-1975) |
|
| Manta 1.6 S (1970-1975) |
|
| Manta 1.9 S (1970-1975) |
|
Additional Notes
- The Opel Manta A cooling system capacities vary across engine variants, ranging from 5.1 liters in the smallest displacement version up to 7.2 liters in certain configurations of the larger-engined models.
- The Manta 1.2 S carries the lowest cooling system capacity in the lineup at 5.1 liters, consistent with the reduced thermal output of a smaller displacement engine requiring less coolant volume to maintain operating temperature.
- Both the Manta 1.6 and Manta 1.6 S share the same base displacement, yet their cooling system capacities differ. The 1.6 is specified at a fixed 6.5 liters, while the 1.6 S carries a range of 6.5 to 7.2 liters, indicating variation across sub-configurations or production runs within that variant.
- The Manta 1.9 S is specified with a capacity range of 6.1 to 7.0 liters, which similarly reflects differences between individual configurations sharing the same engine designation rather than a single fixed fill volume.
- A capacity range rather than a single fixed value, as seen in the 1.6 S and 1.9 S, typically corresponds to differences in auxiliary cooling components such as heater circuits or optional equipment that alter total system volume.
- The Manta 1.9 GT/E, available from 1974, carries a fixed cooling system capacity of 6.8 liters. The GT/E designation denotes a fuel-injected variant, and the fixed single value suggests a consistent system configuration across production of that model.
- The Turbomanta, produced from 1973, has a cooling system capacity of 6.1 liters. Despite the addition of forced induction, which generally increases thermal load, the specified capacity falls at the lower end of the 1.9-liter variants in the range.
- All six variants carry a normal use condition for their cooling system specifications, meaning the stated capacities apply to standard operating environments without adjustment for severe duty cycles.