Nissan Prairie (EU)
Coolant capacity & service interval
Nissan Prairie (EU) coolant capacity ranges from 4,5 to 8,5 liters. Service intervals require changes every 40000 km or 48 months. Data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Prairie 2.0, M10, M11 (1986-1994) |
|
| Prairie 2.0 AWD, M10, M11 (1986-1994) |
|
| Prairie 1.5, M10 (1984-1989) |
|
| Prairie 1.8, M10 (1984-1989) |
|
Additional Notes
- The Nissan Prairie (EU) coolant service interval is consistent across all listed configurations at 40,000 km or 48 months, whichever comes first, under normal use conditions.
- The Prairie 1.5 M10 (1984-1989) carries a base cooling system capacity of 4.5 liters, which is the smallest figure across all listed configurations.
- When the Prairie 1.5 M10 (1984-1989) is equipped with a rear heater, the cooling system capacity rises to 6.5 liters, reflecting the additional fluid volume required to circulate coolant through the rear heating circuit.
- The Prairie 1.8 M10 (1984-1989) has a base capacity of 6.5 liters, and with a rear heater installed, the capacity increases to 8.5 liters, the largest single capacity value listed across all configurations.
- The 2.0-liter AWD variant covering M10 and M11 bodies (1986-1994) has a cooling system capacity of 6.7 liters, which is lower than the 7.4-liter figure recorded for the non-AWD 2.0-liter variant sharing the same body codes and model years.
- The rear heater option on the 1.8 M10 adds 2.0 liters to the base capacity, while the same option on the 1.5 M10 adds 2.0 liters as well, indicating a uniform volume addition for the rear heater circuit regardless of engine displacement in those two configurations.
- The 2.0-liter configurations (1986-1994) do not list a rear heater capacity variant, meaning only a single capacity figure is specified for each of those two configurations.