Nissan Murano, Z51 (EU)

Brake fluid capacity & service interval

Nissan Murano, Z51 (EU) brake fluid capacity is not specified. Service intervals include checks at 15000 km or 12 months and 20000 km, and changes at 15000 km or 12 months, 20000 km or 12 months, 30000 km or 24 months, and 40000 km or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Murano 2.5 dCi (2010-2015)
  • Use: Normal
  • Between min and max.
  • Check 20000 km
  • Change 40000 km/ 24 months
Murano 2.5 dCi (2010-2015)
  • Use: Severe
  • Between min and max.
  • Change 20000 km/ 12 months
Murano 3.5 V6 (2008-2015)
  • Use: Normal
  • Between min and max.
  • Check 15000 km/ 12 months
  • Change 30000 km/ 24 months
Murano 3.5 V6 (2008-2015)
  • Use: Severe
  • Between min and max.
  • Change 15000 km/ 12 months

Additional Notes

  • The fill level for the hydraulic brake system across all listed configurations is specified as between the minimum and maximum marks on the reservoir, rather than a fixed volume, which is standard for brake fluid service where topping up is guided by the existing level rather than a measured quantity.
  • For the Nissan Murano Z51 (EU) 3.5 V6 under normal use conditions, a check interval of 15,000 km or 12 months is specified alongside a change interval of 30,000 km or 24 months, meaning inspection occurs at half the replacement cycle.
  • The 2.5 dCi under normal use conditions carries a check interval of 20,000 km and a change interval of 40,000 km or 24 months, which are longer distances than the corresponding intervals on the 3.5 V6 under the same use condition.
  • Under severe use conditions, the 3.5 V6 specifies a brake fluid change at 15,000 km or 12 months, with no separate check interval listed, meaning the change itself serves as the only scheduled service event in that cycle.
  • The 2.5 dCi under severe use conditions specifies a change at 20,000 km or 12 months, also without a separate check interval, consistent with the pattern seen on the 3.5 V6 under the same use condition.
  • Comparing the two engines under severe use, the 3.5 V6 reaches its change interval 5,000 km sooner than the 2.5 dCi, despite both sharing the same 12-month time limit, indicating a tighter distance-based threshold for the petrol variant in demanding conditions.
  • The 2.5 dCi entered the specification range in 2010, while the 3.5 V6 is listed from 2008, meaning the petrol engine covers a longer portion of the Z51 generation's production span within these records.

Other Systems