Nissan Micra / March, K10 (EU)

Coolant capacity & service interval

Nissan Micra / March, K10 (EU) coolant capacity ranges from 3,5 to 4,8 liters. Service intervals require changes every 40000 km or 48 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Micra / March 1.0, K10 (1989-1991)
  • Use: Normal
  • Capacity 3,5 liter
  • Capacity 3,9 liter (+ heater)
  • Change 40000 km/ 48 months
Micra / March 1.2, K10 (1989-1991)
  • Use: Normal
  • Capacity 4,3 liter
  • Change 40000 km/ 48 months
Micra / March DX 1.0, K10 (1983-1989)
  • Use: Normal
  • Capacity 3,9-4,8 liter
  • Change 40000 km/ 48 months
Micra / March GL 1.0, K10 (1983-1989)
  • Use: Normal
  • Capacity 3,9 liter
  • Change 40000 km/ 48 months

Additional Notes

  • The Nissan Micra / March K10 1.0 (1989-1991) cooling system holds 3.5 liters as a base capacity, rising to 3.9 liters when the heater circuit is included, reflecting the additional fluid volume the heater core and its connecting hoses contribute to the total system fill.
  • The 1.2-liter variant of the K10 (1989-1991) carries a cooling system capacity of 4.3 liters, a notably higher figure than the 3.5-liter base capacity of the 1.0-liter engine from the same production period, indicating a larger engine displacement correlates with a greater coolant volume requirement.
  • The earlier DX 1.0 trim (1983-1989) shows a capacity range of 3.9 to 4.8 liters, which is a wider spread than any single fixed value listed for other K10 configurations, suggesting variation across sub-variants or assembly differences within that trim designation.
  • The GL 1.0 trim (1983-1989) has a fixed cooling system capacity of 3.9 liters, which aligns with the upper end of the DX 1.0 range from the same years, pointing to a consistent ceiling capacity across those two early trims.
  • All four configurations share an identical service interval of 40,000 km or 48 months under normal use conditions, meaning the coolant change schedule does not vary between the 1.0 and 1.2 engine sizes or between the earlier and later production years within the K10 generation.
  • A 48-month maximum interval means coolant replacement is due at least every four years regardless of mileage accumulation, which reflects the time-dependent degradation of coolant additives such as corrosion inhibitors and pH stabilizers.

Other Systems