Nissan Maxima, A34 (USA / CAN)
Coolant capacity & service interval
Nissan Maxima, A34 (USA / CAN) coolant capacity ranges from 8,2 to 8,5 liters. Service intervals include 30000 miles or 24 months and 60000 miles or 48 months. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Maxima 3.5 (CAN) (2007-2008) |
|
| Maxima 3.5 (CAN) (2007-2008) |
|
| Maxima 3.5 (USA) (2007-2008) |
|
| Maxima 3.5 (USA) (2007-2008) |
|
| Maxima 3.5 (CAN) (2006-2007) |
|
| Maxima 3.5 (CAN) (2006-2007) |
|
| Maxima 3.5 (USA) (2006-2007) |
|
| Maxima 3.5 (USA) (2006-2007) |
|
| Maxima 3.5 (CAN) (2003-2006) |
|
| Maxima 3.5 (CAN) (2003-2006) |
|
| Maxima 3.5 (USA) (2003-2006) |
|
| Maxima 3.5 (USA) (2003-2006) |
|
Additional Notes
- The Nissan Maxima A34 cooling system total capacity is listed as a range of 8.2–8.5 liters for the 2003-2006 configuration, while all later configurations from 2006 onward carry a fixed value of 8.5 liters. A total capacity figure represents the full volume of the cooling circuit, including the engine block, cylinder head passages, radiator, and reservoir, rather than a partial drain-and-refill service volume.
- The 2003-2006 capacity range of 8.2–8.5 liters applies equally to both the USA and CAN market configurations, indicating no regional difference in cooling system volume for that period.
- Under normal use conditions, the coolant change interval across all configurations is 30,000 miles or 24 months, whichever comes first. The dual-unit interval structure, combining a mileage threshold with a time limit, accounts for vehicles that accumulate low annual mileage and would otherwise exceed the time-based degradation threshold before reaching the distance trigger.
- A separate, extended interval of 60,000 miles or 48 months applies to the first change only, or in one configuration labeled initial service, across all model year groups. A first-change or initial-service interval reflects the factory-fill coolant, which may carry corrosion inhibitor packages formulated to last longer than subsequent refills before the first flush.
- The 2006-2007 CAN configuration uses the label "initial service" rather than "first change only" for the extended 60,000-mile interval, while the surrounding configurations use "first change only." Both terms correspond to the same 60,000-mile or 48-month interval value in the specifications.
- The 2006 model year appears in two overlapping configuration groups: the 2003-2006 group and the 2006-2007 group. The 2006-2007 group carries the fixed 8.5-liter capacity rather than the 8.2–8.5-liter range, suggesting a mid-cycle specification refinement at that point in production.
- The change intervals are identical between USA and CAN market configurations across all model year groups, with 30,000 miles or 24 months for normal use and 60,000 miles or 48 months for the first change, indicating no market-specific service schedule variation in the coolant specifications.