Morris Ital
Coolant capacity & service interval
Morris Ital uses coolant with a capacity range of 4,26 to 5,68 liters. Service intervals occur every 40000 km or 48 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Ital 1.3 (1983-1985) |
|
| Ital 1.7 (1983-1985) |
|
| Ital 2.0 (1983-1985) |
|
Additional Notes
- The Morris Ital 1.3 carries a coolant capacity of 4.26 liters, which is noticeably lower than the two larger engine variants and reflects the smaller displacement of the 1.3-liter unit.
- Both the 1.7 and 2.0 engine variants share an identical coolant capacity of 5.68 liters, meaning the cooling system volume does not scale further between those two engine sizes.
- Across all three engine variants covering 1983-1985, the change interval is set at 40,000 km or 48 months, whichever comes first, under normal use conditions.
- The 48-month time limit on the coolant change interval means a calendar-based threshold applies regardless of mileage accumulation, which is typical for coolant specifications where fluid degradation occurs over time independently of vehicle use.
- All three configurations are rated under normal use conditions, meaning the 40,000 km / 48-month interval applies to standard operating environments rather than demanding or severe duty cycles.