Mitsubishi Starion (EU)

Manual transmission fluid capacity & service interval

Mitsubishi Starion (EU) manual transmission fluid capacity is 2,3 liters. Service intervals include checks at 20000 km or 24 months, and fluid changes at 40000 km or 48 months and 80000 km or 96 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Starion 2.6 Turbo (1986-1990)
  • Use: Normal
  • Capacity 2,3 liter
  • Check 20000 km/ 24 months
  • Change 80000 km/ 96 months
  • Code: 5/1
Starion 2.6 Turbo (1986-1990)
  • Use: Severe
  • Capacity 2,3 liter
  • Change 40000 km/ 48 months
  • Code: 5/1
Starion 2.0 Turbo (1984-1986)
  • Use: Normal
  • Capacity 2,3 liter
  • Check 20000 km/ 24 months
  • Change 40000 km/ 48 months
  • Code: 5/1

Additional Notes

  • The Mitsubishi Starion (EU) manual transmission fluid capacity is 2.3 liters across all three specification rows, covering both the 2.0 Turbo and 2.6 Turbo engine variants.
  • A 2.3-liter service fill is consistent with a transmission drain-and-refill procedure rather than a full overhaul fill, where residual fluid typically remains in the unit after draining.
  • The 2.0 Turbo (1984-1986) under normal use carries a fluid change interval of 40,000 km or 48 months, whichever comes first.
  • The 2.6 Turbo (1986-1990) under normal use has a fluid change interval of 80,000 km or 96 months, which is double the distance and time interval specified for the 2.0 Turbo.
  • Both the 2.0 Turbo and the 2.6 Turbo under normal use share a fluid check interval of 20,000 km or 24 months, meaning a visual or level inspection is due at half the change interval in both cases.
  • The 2.6 Turbo (1986-1990) under severe use carries a change interval of 40,000 km or 48 months, which matches the full change interval of the 2.0 Turbo under normal use.
  • No fluid check interval appears in the severe-use row for the 2.6 Turbo, whereas the normal-use row for the same engine includes a 20,000 km or 24-month check interval.
  • Severe use conditions generally refer to operation involving frequent short trips, towing, off-road driving, or extreme temperatures, all of which accelerate fluid degradation and justify the halved change interval seen in the 2.6 Turbo severe-use specification.

Other Systems