Mitsubishi Space Star / Mirage, A0 (EU)

Brake fluid capacity & service interval

Mitsubishi Space Star / Mirage, A0 (EU) brake fluid capacity ranges between min and max. Service intervals include checks at 20000 km/12 months and changes at 40000 km/24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Space Star / Mirage 1.2 Mivec (2020- )
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months
Space Star / Mirage 1.0 Mivec (2018-2021)
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months
Space Star / Mirage 1.2 Mivec (2018-2020)
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months
Space Star / Mirage 1.0 Mivec (2012-2018)
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months
Space Star / Mirage 1.2 Mivec (2012-2018)
  • Use: Normal
  • Between min and max.
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months

Additional Notes

  • Across all configurations of the Mitsubishi Space Star / Mirage A0 (EU), brake fluid level is specified to be maintained between the minimum and maximum marks on the reservoir, rather than defined by a fixed fill volume. A "between min and max" specification is typical for hydraulic brake systems where fluid level is monitored by sight rather than measured by quantity during routine service.
  • The check interval for the hydraulic brake system is 20,000 km or 12 months under normal use conditions, whichever comes first. The 12-month time limit reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time regardless of distance driven.
  • The change interval is set at 40,000 km or 24 months under normal use conditions. The 24-month ceiling means a vehicle covering very low annual mileage would still require a fluid change on a two-year cycle before reaching the distance threshold.
  • The 1.0 Mivec engine variant carries the same check and change intervals as the 1.2 Mivec across all respective model year ranges, with no differentiation in brake fluid service requirements between the two engine displacements.
  • The 1.0 Mivec configuration is covered across two distinct year ranges: 2012-2018 and 2018-2021. Both share identical brake fluid specifications, indicating no change in service requirements was introduced at the 2018 production boundary for that engine.
  • The 1.2 Mivec configuration spans three separate year ranges: 2012-2018, 2018-2020, and from 2020 onward. All three carry the same brake fluid level guidance and identical check and change intervals, showing continuity in hydraulic brake system service requirements across the generational splits of the 1.2 Mivec.

Other Systems