Mitsubishi Pajero Sport / Montero Sport, PB/PC (EU)
Transfer case fluid capacity & service interval
Mitsubishi Pajero Sport / Montero Sport, PB/PC (EU) requires transfer case fluid with a capacity range of 2,3 to 2,5 liters. Service intervals consist of checks every 15000 km or 12 months and changes every 45000 km or 36 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Pajero Sport / Montero Sport 2.5D (2010-2016) |
|
| Pajero Sport / Montero Sport 2.5D (2010-2016) |
|
| Pajero Sport / Montero Sport 3.0 (2010-2016) |
|
| Pajero Sport / Montero Sport 3.2D (2008-2011) |
|
Additional Notes
- The Mitsubishi Pajero Sport / Montero Sport 2.5D (2010-2016) transfer case carries two listed capacity values: 2.3 liters and 2.5 liters. A difference of this kind between two entries for the same engine typically reflects variation between transfer case assembly variants or production revisions within the same model year range.
- The 2.3-liter transfer case capacity figure applies exclusively to the 2.5D engine under normal use conditions, with a check interval of 15,000 km or 12 months and a change interval of 45,000 km or 36 months.
- The 2.5-liter transfer case capacity is shared across the 2.5D (2010-2016), the 3.0 (2010-2016), and the 3.2D (2008-2011), indicating a common transfer unit across multiple engine configurations despite differences in displacement and fuel type.
- All four rows carry a normal use condition, meaning the stated check and change intervals are not adjusted for demanding operating environments such as off-road driving, towing, or extreme temperatures.
- The fluid check interval across all listed configurations is 15,000 km or 12 months, whichever comes first. A check interval shorter than the change interval serves to monitor fluid condition and level between full drain-and-fill services.
- The fluid change interval for all listed configurations is 45,000 km or 36 months. At a 2.5-liter fill volume, a full drain-and-fill service at each change interval represents a moderate fluid volume relative to typical transfer case sizes in this class.
- The 3.2D engine variant covers the 2008-2011 period, while the 2.5D and 3.0 variants begin in 2010. The 3.2D therefore represents the only engine with transfer case specifications extending back to 2008 within the listed data.