Mitsubishi Galloper (EU)

Manual transmission fluid capacity & service interval

Mitsubishi Galloper (EU) manual transmission fluid capacity ranges from 2,2 to 2,7 liters. Service intervals include checks at 7500 km or 6 months, and changes at 7500 km or 6 months and 45000 km or 36 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Galloper 2.5 TD (1999-2003)
  • Use: Normal
  • Capacity 2,2 liter
  • Check 7500 km/ 6 months
  • Change 45000 km/ 36 months
  • Code: V5M21 5/1
Galloper 2.5 TD (1999-2003)
  • Use: Initial service
  • Capacity 2,2 liter
  • Change 7500 km/ 6 months
  • Code: V5M21 5/1
Galloper 2.5 TD (1999-2003)
  • Use: Normal
  • Capacity 2,7 liter
  • Check 7500 km/ 6 months
  • Change 45000 km/ 36 months
  • Code: V5MT1 5/1
Galloper 2.5 TD (1999-2003)
  • Use: Initial service
  • Capacity 2,7 liter
  • Change 7500 km/ 6 months
  • Code: V5MT1 5/1

Additional Notes

  • The Mitsubishi Galloper (EU) 2.5 TD lists two distinct manual transmission fluid capacities for the 1999-2003 period: 2.2 liters and 2.7 liters, indicating a variation between transmission configurations fitted to the same engine variant.
  • A 0.5-liter difference between the two capacity figures is meaningful in transmission servicing, as underfilling a unit to 2.2 liters when the actual sump requires 2.7 liters would leave the gearbox operating below the intended lubrication level.
  • Both capacity variants share identical normal-use check intervals of every 7,500 km or 6 months, whichever comes first.
  • Under normal use, the fluid change interval for both the 2.2-liter and 2.7-liter configurations is set at 45,000 km or 36 months, reflecting a relatively conservative drain cycle for a manual transmission of this era.
  • An initial service interval is specified separately for both capacity variants, with a fluid change due at 7,500 km or 6 months, which matches the standard check interval but serves as a break-in drain rather than a routine replacement cycle.
  • The initial service change interval of 7,500 km or 6 months is considerably shorter than the 45,000 km or 36-month normal-use change interval, a gap that reflects the common practice of removing metal particles and manufacturing residues accumulated during early transmission wear-in.

Other Systems