Mitsubishi ASX, VSX/VSE (EU)

Manual transmission fluid capacity & service interval

Mitsubishi ASX, VSX/VSE (EU) manual transmission fluid capacity ranges from 1,2 to 1,9 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ASX 1.0 (67 kW) (2023- )
  • Use: Normal
  • Capacity 1,2 liter
  • Code: JT4 6/1
ASX 1.3 (103 kW) (2023- )
  • Use: Normal
  • Capacity 1,9 liter (Initial Fill Gen 1)
  • Capacity 1,4 liter (Initial Fill Gen 2)
  • Code: TL4 6/1

Additional Notes

  • The Mitsubishi ASX 1.0 (67 kW) manual transaxle holds 1.2 liters of fluid under normal use conditions.
  • The ASX 1.3 (103 kW) manual transaxle capacity varies by generation. Gen 1 carries an initial fill of 1.9 liters, while Gen 2 carries 1.4 liters, a difference of 0.5 liters between the two variants.
  • Both capacities listed for the 1.3 (103 kW) are designated as initial fill figures, meaning they reflect the factory-filled volume rather than a service drain-and-refill quantity, which typically recovers less fluid due to residual volume remaining in the unit.
  • The 1.0 (67 kW) and 1.3 (103 kW) engines share the same manual transaxle note but differ noticeably in fluid capacity, with the larger-displacement engine requiring more fluid regardless of generation.

Other Systems