Mitsubishi 3000GT (USA / CAN)
Transfer case fluid capacity & service interval
Mitsubishi 3000GT (USA / CAN) transfer case fluid capacity is 0,3 liter. Service intervals include checking and changing fluid every 30000 miles. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 3000GT VR-4 (1993-1999) |
|
| 3000GT VR-4 (1993-1999) |
|
| 3000GT VR-4 (1990-1993) |
|
| 3000GT VR-4 (1990-1993) |
|
Additional Notes
- The Mitsubishi 3000GT VR-4 transfer case holds 0.3 liter of fluid across all listed configurations, spanning the 1990-1999 model year range. A capacity this small reflects the compact nature of the transfer unit relative to a full-size truck-style transfer case.
- For the 1990-1993 VR-4, the normal use condition calls for a fluid check at 30,000 miles rather than a change, meaning the interval is an inspection point to verify fluid level and condition without necessarily draining and refilling.
- Under severe use conditions for the 1990-1993 VR-4, the 30,000-mile interval becomes a full fluid change rather than a check, indicating a more demanding service action at the same mileage threshold.
- The 1993-1999 VR-4 carries the same 0.3-liter capacity and the same 30,000-mile check interval under normal use as the earlier 1990-1993 specification, showing no change in transfer case fluid volume between the two generation groupings.
- Severe use for the 1993-1999 VR-4 also mirrors the earlier generation, with a fluid change required at 30,000 miles, consistent with the pattern seen in the 1990-1993 rows.
- The 30,000-mile service point applies uniformly across both generation groupings and both use conditions, though the nature of the service differs: a check under normal use and a change under severe use.