MINI MINI Countryman, U25 (USA)

Automatic transmission fluid capacity & service interval

MINI Countryman, U25 (USA) automatic transmission fluid capacity ranges from 2,1 to 5,5 liters. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MINI Countryman JCW ALL4 (233 kW) (2024- )
  • Use: Normal
  • Capacity 4,8-5,5 liter (Initial fill)
  • Capacity 3,95-4,6 liter (Service fill)
  • Code: Getrag 7DCT300TUE/ 7DCT400/ 7HDT400 7/1
MINI Countryman S ALL4 (180 kW) (2024- )
  • Use: Normal
  • Capacity 4,8-5,5 liter (Initial fill)
  • Capacity 3,95-4,6 liter (Service fill)
  • Code: Getrag 7DCT300TUE/ 7DCT400/ 7HDT400 7/1
  • MINI Countryman SE ALL4 (2024- )
  • Electric drive
  • Use: Normal
  • Capacity 2,1 liter
  • Code: HEAT 220MF, 220LR, 220 XLR 1/1

Additional Notes

  • The MINI Countryman U25 automatic transmission fluid specifications cover three distinct powertrain configurations for the 2024 model year, each carrying different capacity figures.
  • The JCW ALL4 (233 kW) and S ALL4 (180 kW) variants share identical fluid capacity ranges, with an initial fill of 4.8-5.5 liters and a service fill of 3.95-4.6 liters under normal use conditions.
  • The gap between the initial fill and service fill figures on the JCW ALL4 and S ALL4 reflects the volume of fluid that remains trapped in the torque converter and passages after a drain, meaning a service fill never fully restores the total system volume.
  • Both the JCW ALL4 and S ALL4 are noted as transaxle, semi-automatic units, indicating the transmission and drive axle share a common housing, which is a relevant factor when interpreting the stated fluid capacities.
  • The SE ALL4 carries an e-transmission designation, distinguishing it from the semi-automatic transaxle found in the combustion-engine variants, and its fluid capacity is listed as a single value of 2.1 liters.
  • At 2.1 liters, the SE ALL4 e-transmission holds considerably less fluid than the 4.8-5.5 liter initial fill required by the JCW ALL4 and S ALL4, a difference consistent with the simpler mechanical architecture of electric drive units compared to conventional automatic transaxles.
  • All three configurations carry a normal use condition designation, meaning the listed capacities and service parameters apply to standard operating environments rather than severe-duty cycles.

Other Systems