MINI MINI Countryman, R60 (USA)

Brake fluid capacity & service interval

MINI Countryman, R60 (USA) brake fluid capacity ranges between min and max. Service intervals require a change every 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MINI Countryman Cooper (90 kW) (2010-2016)
  • DSC
  • Use: Normal
  • Between min and max.
  • Change 24 months
  • MINI Countryman Cooper S (135 kW) (2010-2016)
  • DSC
  • Use: Normal
  • Between min and max.
  • Change 24 months
  • MINI Countryman Cooper S ALL4 (135 kW) (2010-2016)
  • DSC
  • Use: Normal
  • Between min and max.
  • Change 24 months
  • MINI Countryman John Cooper Works ALL4 (160 kW) (2010-2016)
  • DSC
  • Use: Normal
  • Between min and max.
  • Change 24 months

Additional Notes

  • Across all four configurations of the MINI Countryman R60 covered here, brake fluid capacity is expressed as "between min and max" rather than as a fixed volume, which is standard practice for hydraulic brake systems where the reservoir level is read directly from the min/max markings on the reservoir body rather than measured by quantity.
  • The 24-month change interval applies uniformly under normal use conditions to the Cooper (90 kW), Cooper S (135 kW), Cooper S ALL4 (135 kW), and John Cooper Works ALL4 (160 kW) variants across the 2010-2016 model years.
  • A 24-month brake fluid change interval is consistent with the hygroscopic nature of glycol-based brake fluids, which absorb moisture over time and lower the fluid's boiling point, making time-based replacement a standard industry practice regardless of mileage.
  • The specifications note that the hydraulic system covered includes both the brake and clutch circuits as well as the DSC (Dynamic Stability Control) system, meaning the fluid reservoir serves all three functions simultaneously across the listed configurations.
  • The John Cooper Works ALL4 at 160 kW carries the same 24-month normal-use interval as the lower-output Cooper at 90 kW, indicating no differentiation in brake fluid service scheduling based on power output within the R60 lineup as specified here.
  • The ALL4 designation on both the Cooper S ALL4 and John Cooper Works ALL4 denotes all-wheel drive, yet the brake fluid specifications for those variants remain identical to the front-wheel-drive Cooper and Cooper S, with no separate interval or capacity noted for the additional drivetrain hardware.

Other Systems