Mercury Capri
Manual transmission fluid capacity & service interval
Mercury Capri manual transmission fluid has a capacity range of 3,2 to 3,4 liters. Service intervals require a check every 12000 km or 12 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Capri (1991-1994) |
|
| Capri XR2 Turbo (1989-1994) |
|
Additional Notes
- The Mercury Capri XR2 Turbo carries a manual transaxle fluid capacity of 3.4 liters, which is 0.2 liters more than the 3.2-liter capacity specified for the standard Capri. A larger capacity in a turbocharged application generally reflects the additional thermal and mechanical demands placed on the transmission fluid.
- The standard Capri's 3.2-liter manual transaxle capacity applies to the 1991-1994 model years, while the XR2 Turbo's 3.4-liter figure spans the wider 1989-1994 range, meaning the two configurations overlap across four of those years with differing fill requirements.
- Both configurations share an identical service interval of 12,000 km or 12 months under normal use conditions, whichever comes first. A combined distance-and-time interval of this type accounts for vehicles that may not accumulate mileage quickly enough to trigger a distance-based service within a reasonable period.
- The capacities listed for both the standard Capri and the XR2 Turbo represent transaxle service fill volumes. A transaxle integrates the transmission and differential into a single housing, so the stated capacity covers the entire shared fluid reservoir rather than separate components.