Mercedes-Benz Vaneo, W414 (EU)

Coolant capacity & service interval

Mercedes-Benz Vaneo, W414 (EU) models require 6 liters of coolant. The service interval for coolant replacement is 36 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Vaneo 1.6 (60 kW) (2001-2006)
  • Use: Normal
  • Capacity 6 liter
  • Change 36 months
Vaneo 1.6 (75 kW) (2001-2006)
  • Use: Normal
  • Capacity 6 liter
  • Change 36 months
Vaneo 1.9 (2001-2006)
  • Use: Normal
  • Capacity 6 liter
  • Change 36 months
Vaneo CDI (55 kW) (2001-2006)
  • Use: Normal
  • Capacity 6 liter
  • Change 36 months
Vaneo CDI (66 kW) (2001-2006)
  • Use: Normal
  • Capacity 6 liter
  • Change 36 months

Additional Notes

  • The Mercedes-Benz Vaneo W414 (EU) carries a uniform 6-liter cooling system capacity across all five engine variants covered in the 2001-2006 model range, spanning both petrol and diesel configurations.
  • The 6-liter figure represents the total cooling system fill volume, meaning the amount of coolant mixture required to fill the entire circuit including the radiator, engine block passages, heater core, and expansion tank.
  • All three petrol variants — the 1.6 at 60 kW, the 1.6 at 75 kW, and the 1.9 — share an identical 6-liter capacity, indicating no meaningful difference in cooling circuit volume despite the output gap between the lower and higher power 1.6-liter engines.
  • Both CDI diesel variants, rated at 55 kW and 66 kW respectively, also hold 6 liters, placing the diesel cooling system capacity on equal footing with the petrol units across the same model years.
  • A 36-month change interval applies uniformly across all five configurations under normal use conditions, meaning coolant renewal is time-based rather than mileage-based for the Vaneo W414 range.
  • A 36-month interval is a relatively standard schedule for coolant in passenger and light commercial vehicles of the early 2000s era, reflecting the service life of conventional silicate or OAT-based antifreeze formulations before additive depletion becomes a concern.
  • The absence of a separate severe-use interval across all five rows means the 36-month schedule is the sole defined service cycle, with no shortened replacement period specified for demanding operating conditions.

Other Systems