Mercedes-Benz S-Class, W220 / V220 (EU)

Transfer case fluid capacity & service interval

Mercedes-Benz S-Class, W220 / V220 (EU) models utilize transfer case fluid with a capacity of 0,59 liter. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
S 350 4MATIC, 220.087/187 (2003-2005)
  • Use: Normal
  • Capacity 0,59 liter
S 430 4MATIC, 220.083/183 (2003-2005)
  • Use: Normal
  • Capacity 0,59 liter
S 500 4MATIC, 220.084/184 (2003-2005)
  • Use: Normal
  • Capacity 0,59 liter

Additional Notes

  • The Mercedes-Benz S-Class W220/V220 transfer case capacity is listed at 0.59 liter across all three 4MATIC variants covered in the 2003-2005 specifications.
  • A transfer case fill volume of 0.59 liter is a relatively small capacity, consistent with the compact transfer units found in passenger car-based all-wheel drive systems rather than truck-derived transfer cases.
  • The S 350 4MATIC (chassis code 220.087/187), S 430 4MATIC (220.083/183), and S 500 4MATIC (220.084/184) all share an identical 0.59 liter transfer case capacity, indicating a common transfer unit across the V6 and V8 4MATIC applications in the W220/V220 lineup.
  • All three configurations carry a normal use condition designation, meaning the 0.59 liter fill specification applies to standard operating conditions rather than a severe-duty service interval.
  • The capacity figure of 0.59 liter represents a service fill quantity for the transfer case, which is the working fluid volume maintained during routine fluid changes rather than a dry-fill or overhaul volume that would typically be higher.

Other Systems