Mercedes-Benz GLC-Class / Coupé, X254 / C254 (USA / CAN)
Coolant capacity & service interval
Mercedes-Benz GLC-Class / Coupé, X254 / C254 (USA / CAN) coolant capacity ranges from 3 to 15,2 liters. Service intervals require changes every 124000 miles or 120 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Mercedes-Benz GLC-Class / Coupé X254 / C254 coolant service interval is uniform across all listed configurations at 124,000 miles or 120 months under normal use conditions, which translates to a 10-year or roughly six-figure mileage replacement cycle.
- Both the GLC 300 (254.146/346/646) and GLC 300 4MATIC (254.147/347/647) share identical coolant capacities, with 14 liters in the primary cooling system and 3 liters in the secondary cooling system, starting from 2022.
- The presence of a secondary cooling circuit across all listed configurations indicates a multi-loop thermal management architecture, where separate coolant volumes serve distinct components such as the powertrain electronics or transmission.
- The GLC 350 e 4MATIC (254.156/356/656), starting from 2023, carries a primary cooling system capacity of 15.2 liters, which is the largest primary circuit volume among all listed configurations.
- The GLC 350 e 4MATIC secondary cooling system holds 7 liters, more than double the 3-liter secondary capacity of the GLC 300 variants, reflecting the additional thermal load associated with a plug-in hybrid drivetrain's high-voltage components.
- The GLC 43 AMG 4MATIC (254.187/387/687), starting from 2023, has a primary cooling system capacity of 12.4 liters, which is the smallest primary circuit volume across all listed configurations despite being a performance-oriented variant.
- The GLC 43 AMG 4MATIC secondary cooling system capacity is 5.1 liters, placing it between the GLC 300's 3-liter and the GLC 350 e 4MATIC's 7-liter secondary volumes.
- All eight specification rows carry a normal use condition designation, meaning the 124,000-mile and 120-month intervals are not adjusted for severe operating environments in the listed data.