Mercedes-Benz GLB-Class, X247 (EU)

Manual transmission fluid capacity & service interval

Mercedes-Benz GLB-Class, X247 (EU) manual transmission fluid has a capacity of 1,8 liters. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
GLB 200, 247.687 (2023- )	Use: Normal Capacity 1,8 liter Code: 711.635 6/1
GLB 200, 247.687 (2020-2022)	Use: Normal Capacity 1,8 liter Code: 711.635 6/1
GLB 220 d, 247.614 (2020- )	Use: Normal Capacity 1,8 liter Code: 711.636 6/1
GLB 180 d, 247.610 (2019- )	Use: Normal Capacity 1,8 liter Code: 711.636 6/1
GLB 200, 247.687 (2019-2020)	Use: Normal Capacity 1,8 liter Code: 711.635 6/1
GLB 200 d, 247.612 (2019- )	Use: Normal Capacity 1,8 liter Code: 711.636 6/1

All six configurations listed for the Mercedes-Benz GLB-Class X247 share a uniform manual transaxle fluid capacity of 1.8 liters under normal use conditions.
A capacity figure of 1.8 liters is consistent with a service fill specification, meaning the quantity required when draining and refilling an installed unit rather than a full overhaul or bench-fill procedure.
The transaxle designation indicates the manual gearbox and final drive are housed in a single combined unit, which is typical for front-wheel-drive and transverse-engine layouts.
The GLB 200 (247.687) appears across three separate production intervals — 2019-2020, 2020-2022, and 2023 onward — each listed as a distinct row, yet all three carry the same 1.8-liter capacity under normal use.
The diesel variants GLB 180 d (247.610), GLB 200 d (247.612), and GLB 220 d (247.614) share the same 1.8-liter manual transaxle capacity as the petrol GLB 200 (247.687), indicating no capacity difference between diesel and petrol powertrains in this application.
All specifications are stated for normal use conditions, which in automotive service terminology generally refers to standard on-road driving as opposed to severe or extended-interval schedules.