Mercedes-Benz EQE-Class Sedan, W295 (USA / CAN)
Coolant capacity & service interval
Mercedes-Benz EQE-Class Sedan, W295 (USA / CAN) uses coolant with a capacity range of 11 to 13 liters. Service intervals require a change every 130500 miles or 144 months. The data covers 10 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| EQE 350 4MATIC, 295.112 (2022- ) |
|
|
|
| EQE 350+, 295.121 (2022- ) |
|
|
|
| EQE 500 4MATIC, 295.122 (2022- ) |
|
|
|
| EQE 53 AMG 4MATIC (460kW), 295.153 (2022- ) |
|
|
|
| EQE 53 AMG 4MATIC (505kW), 295.153 (2022- ) |
|
|
|
Additional Notes
- The Mercedes-Benz EQE-Class Sedan W295 uses a dual-loop cooling architecture, with each variant carrying a separate primary cooling system and a secondary cooling system rather than a single unified circuit.
- Across all listed variants — the EQE 350 4MATIC (295.112), EQE 350+ (295.121), EQE 500 4MATIC (295.122), and EQE 53 AMG 4MATIC (295.153) — the primary cooling system capacity is 11 liters.
- The secondary cooling system holds 13 liters across every listed variant, making the combined coolant volume 24 liters per vehicle when both circuits are serviced together.
- A 13-liter secondary circuit is a notably large capacity for a supplemental loop, reflecting the thermal management demands of high-voltage electric drive components such as battery packs and power electronics.
- The service interval for both the primary and secondary cooling systems is 130,500 miles or 144 months under normal use conditions, applying uniformly across all listed variants.
- 144 months equals 12 years, placing the coolant change interval well beyond typical internal combustion engine service schedules and consistent with long-life coolant formulations used in electric vehicle thermal systems.
- The EQE 53 AMG 4MATIC (295.153) is listed in two output states — 460 kW and 505 kW — yet both share identical 11-liter primary and 13-liter secondary capacities, with no difference in service intervals between the two power levels.
- All capacity and interval figures are specified under normal use conditions, which is the sole use condition listed across every row in the specifications.