Mazda Premacy, CP (EU)
Manual transmission fluid capacity & service interval
Mazda Premacy, CP (EU) manual transmission fluid capacity is 2,7 liters. Service intervals include checks at 30000 km/24 months and 45000 km/36 months, with fluid changes at 90000 km/72 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Premacy 1.8 (2001-2005) |
|
| Premacy 2.0 (2001-2005) |
|
| Premacy 2.0 DiTD (2000-2005) |
|
| Premacy 1.8 (1999-2001) |
|
| Premacy 2.0 DiTD (1999-2000) |
|
Additional Notes
- The Mazda Premacy CP manual transaxle fluid capacity is 2.7 liters across all listed engine variants and model year ranges, a figure that represents a service fill volume rather than an overhaul or dry-fill measurement.
- All five configurations share an identical change interval of 90,000 km or 72 months under normal use conditions, meaning the drain-and-refill service falls on the same schedule regardless of engine type.
- The check interval differs between earlier and later production periods. The 1.8 (1999-2001) and 2.0 DiTD (1999-2000) variants specify a fluid level check at 45,000 km or 36 months, while the remaining configurations from 2001 onward specify a shorter check interval of 30,000 km or 24 months.
- The tightening of the check interval from 45,000 km to 30,000 km does not affect the change interval, which remains at 90,000 km or 72 months across all configurations.
- The 1.8-liter engine spans two separate specification entries divided at 2001, with the pre-2001 variant carrying the longer check interval and the post-2001 variant aligning with the shorter schedule shared by the 2.0-liter petrol engine.
- The 2.0 DiTD diesel transaxle follows the same 2.7-liter capacity as the petrol variants, indicating no difference in transaxle size between the diesel and petrol applications in the Premacy CP range.
- All specifications are listed under normal use conditions, meaning the intervals stated apply to standard operating environments as defined by that classification.