Mazda MX-5 / Miata, NC (USA / CAN)

Power steering fluid capacity & service interval

Mazda MX-5 / Miata, NC (USA / CAN) requires power steering fluid with a capacity of 1,2 liters. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MX-5 / Miata 2.0 (118 kW) (2010-2015)
  • Use: Normal
  • Capacity 1,2 liter
MX-5 / Miata 2.0 (125 kW) (2010-2015)
  • Use: Normal
  • Capacity 1,2 liter
MX-5 / Miata 2.0 (118 kW) (2005-2010)
  • Use: Normal
  • Capacity 1,2 liter
MX-5 / Miata 2.0 (125 kW) (2005-2010)
  • Use: Normal
  • Capacity 1,2 liter

Additional Notes

  • The Mazda MX-5 Miata NC carries a power steering fluid capacity of 1.2 liters across all four listed configurations spanning 2005-2015.
  • Both the 118 kW and 125 kW engine variants share the same 1.2-liter capacity figure, meaning output level has no bearing on the power steering system volume in NC-generation models.
  • The 1.2-liter figure represents a full system capacity, which is the total volume the power steering circuit holds rather than a partial top-up quantity.
  • All four configurations carry a normal use condition designation, meaning the 1.2-liter capacity applies under standard operating circumstances rather than severe or first-change-only scenarios.
  • The 118 kW and 125 kW variants each span two overlapping date ranges, 2005-2010 and 2010-2015, with the capacity remaining unchanged across both periods for each respective engine output.

Other Systems