Mazda MX-30, DR (USA / CAN)
Coolant capacity & service interval
Mazda MX-30, DR (USA / CAN) requires coolant with a capacity of 4,3 liters. Service intervals include 60000 miles/ 60 months and 120000 miles/ 180 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MX-30 (2021- ) |
|
| MX-30 (2021- ) |
|
Additional Notes
- The Mazda MX-30 DR cooling system holds 4.3 liters of coolant, a capacity consistent with a service fill rather than a full overhaul drain, as the figure reflects the working volume of the system under normal operating conditions.
- Under normal use conditions, the cooling system interval is set at 60,000 miles or 60 months, whichever comes first, placing the change frequency at a five-year or distance-based cycle.
- The initial service interval extends significantly to 120,000 miles or 180 months, meaning the factory-fill coolant is rated to last up to 15 years or double the mileage of subsequent normal-use changes.
- Both the normal and initial service rows share the same 4.3-liter capacity, confirming the fill volume remains constant regardless of whether the service is a first-time drain or a routine replacement.
- The 180-month initial service interval reflects the use of a long-life coolant formulation at the factory, a common practice in which the first fill is chemically distinct from standard replacement coolant and carries extended corrosion inhibitor life.
- After the initial service interval is completed, the cooling system transitions to the normal use schedule of 60,000 miles or 60 months, effectively halving both the mileage and time thresholds for subsequent changes.