Mazda CX-3, DK (EU)
Transfer case fluid capacity & service interval
The Mazda CX-3, DK (EU) uses transfer case fluid with a capacity of 0.4 liter. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| CX-3 SKYACTIV-D 1.8 (85 kW) 4WD (2018-2020) |
|
| CX-3 SKYACTIV-D 1.5 (77 kW) 4WD (2015-2018) |
|
| CX-3 SKYACTIV-G 2.0 (110 kW) 4WD (2015-2020) |
|
Additional Notes
- The Mazda CX-3 DK (EU) transfer case fluid capacity is 0.4 liter across all three listed 4WD configurations, covering the SKYACTIV-D 1.5, SKYACTIV-D 1.8, and SKYACTIV-G 2.0 engine variants.
- A 0.4 liter capacity is characteristic of a compact transfer case unit, which is typical for crossover-class vehicles where the rear axle drive system is relatively small compared to body-on-frame 4WD platforms.
- All three configurations specify the capacity under normal use conditions, meaning the 0.4 liter figure applies to standard operating environments rather than severe-duty cycles.
- The SKYACTIV-D 1.5 (77 kW) 4WD covers the 2015-2018 model years, while the SKYACTIV-D 1.8 (85 kW) 4WD applies from 2018-2020, indicating a diesel engine displacement increase mid-generation with no change to the transfer case fluid capacity.
- Despite the difference between the diesel and petrol powertrains, the SKYACTIV-G 2.0 (110 kW) 4WD shares the same 0.4 liter transfer case capacity as both diesel variants across its 2015-2020 span.