Mazda 5, CR (USA / CAN)
Manual transmission fluid capacity & service interval
Mazda 5, CR (USA / CAN) manual transmission fluid capacity ranges from 2,77 to 2,87 liters. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 5 2.3 (CAN) (2009-2010) |
|
| 5 2.3 (USA) (2009-2010) |
|
| 5 2.3 (CAN) (2006-2009) |
|
| 5 2.3 (USA) (2006-2009) |
|
| 5 2.3 (CAN) (2005-2006) |
|
| 5 2.3 (USA) (2005-2006) |
|
Additional Notes
- All six configurations cover the Mazda 5 CR with a 2.3-liter engine and manual transaxle, spanning model years 2005-2010 across both the USA and Canadian markets.
- The 2005-2006 and 2006-2009 entries for both markets share a capacity range of 2.77-2.87 liters. A range rather than a single fixed value typically reflects minor variation between drain-and-refill service fills and the slightly higher volume required after a full disassembly or overhaul.
- For the 2009-2010 model years, the specified capacity narrows to a single fixed value of 2.77 liters in both the USA and Canadian configurations, replacing the earlier range with a precise service fill figure.
- The shift from a 2.77-2.87 liter range to a fixed 2.77 liter value between the 2006-2009 and 2009-2010 entries represents a tightening of the fill specification for the later production period, with 2.77 liters representing the lower bound of the earlier range becoming the sole stated capacity.
- All entries are designated for normal use conditions, meaning the stated capacities apply to standard operating environments rather than severe-duty cycles such as frequent towing, extreme temperatures, or high-load driving.
- The USA and Canadian market specifications are identical in both capacity values and year groupings across all three model year brackets, indicating no market-specific fluid volume differences for the manual transaxle on the 2.3-liter CR generation.