Mazda 2, DE (USA / CAN)

Automatic transmission fluid capacity & service interval

Mazda 2, DE (USA / CAN) automatic transmission fluid capacity ranges from 2,5 to 7 liters. Service intervals are not specified. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2 1.5 (CAN) (2010-2014)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 4,5 liter (Overhaul capacity)
  • Capacity 2,5 liter (Service fill)
  • Code: FN4A-EL 4/1
2 1.5 (USA) (2010-2014)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 4,5 liter (Overhaul capacity)
  • Capacity 2,5 liter (Service fill)
  • Code: FN4A-EL 4/1

Additional Notes

  • The automatic transaxle on the Mazda 2, DE carries a dry fill capacity of 7 liters, which represents the total fluid volume required when filling a completely empty unit, such as during a new transmission installation.
  • An overhaul capacity of 4.5 liters is listed for the automatic transaxle, reflecting the amount of fluid needed after a rebuild where the unit is partially disassembled and residual fluid remains in internal passages and components.
  • The service fill capacity of 2.5 liters is the smallest of the three values, representing the volume exchanged during a routine fluid service where only the pan is dropped and the converter retains its fluid.
  • Both the Canadian and American 1.5-liter configurations share identical dry fill, overhaul, and service fill capacities across the 2010-2014 model years, with no variation between the two market specifications.
  • All listed capacity values apply under normal use conditions, meaning the intervals and volumes are not adjusted for severe driving patterns such as towing, frequent short trips, or extreme temperature operation.

Other Systems