Maserati Grecale, M182

Brake fluid capacity & service interval

Maserati Grecale and M182 models utilize brake fluid with a capacity range of 0,8 to 0,9 liters. Service intervals include a check every 20000 km and a change every 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Grecale GT 2.0 MHEV (221kW) (2022- )
  • Use: Normal
  • Capacity 0,9 liter
  • Check 20000 km
  • Change 24 months
Grecale Modena 2.0 MHEV (243kW) (2022- )
  • Use: Normal
  • Capacity 0,9 liter
  • Check 20000 km
  • Change 24 months
Grecale Trofeo (2022- )
  • Use: Normal
  • Capacity 0,8 liter
  • Check 20000 km
  • Change 24 months

Additional Notes

  • The Maserati Grecale M182 brake fluid system holds 0,9 liters across both the GT 2.0 MHEV (221kW) and Modena 2.0 MHEV (243kW) variants, a capacity figure that reflects the total volume of the hydraulic brake circuit rather than a partial top-up quantity.
  • The Grecale Trofeo carries a slightly lower brake fluid capacity of 0,8 liters compared to the two MHEV variants, indicating a marginally smaller hydraulic circuit volume in the Trofeo configuration.
  • All three variants share an identical check interval of 20,000 km under normal use conditions, meaning the fluid level and condition are to be inspected at each occurrence of that mileage threshold.
  • The change interval across all three variants is set at 24 months under normal use conditions, a time-based rather than mileage-based replacement schedule, which reflects the hygroscopic nature of brake fluid and its tendency to absorb moisture over time regardless of distance driven.
  • The GT 2.0 MHEV and Modena 2.0 MHEV share identical capacity and interval specifications despite differing in power output by 22kW, suggesting the hydraulic brake system architecture is common between the two mild-hybrid trim levels.
  • All three variants are noted specifically as hydraulic brake systems, which is the context in which the 0,9-liter and 0,8-liter capacity values apply, distinguishing the specification from any electronically actuated or dry brake system measurement.

Other Systems