Maserati GranCabrio
Power steering fluid capacity & service interval
Maserati GranCabrio power steering fluid capacity is 1 liter. Service intervals include a 24 month change and a 20000 km check. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| GranCabrio (2018-2020) |
|
| GranCabrio (2012-2017) |
|
| GranCabrio MC (2012-2014) |
|
| GranCabrio Sport (2011-2012) |
|
| GranCabrio (2010-2012) |
|
Additional Notes
- The Maserati GranCabrio power steering system holds a capacity of 1 liter across all listed configurations, spanning the base model, Sport, and MC variants from 2010 through 2020.
- A 1-liter capacity is consistent with a hydraulic power steering reservoir service fill, representing the fluid volume required to replenish or replace the working fluid in the system rather than a full overhaul quantity.
- All five configurations carry a normal use condition tied to a 24-month change interval, meaning the fluid replacement schedule is based on time elapsed rather than distance traveled alone.
- The 2010-2012 base GranCabrio and the 2011-2012 Sport share an identical specification of 1 liter capacity with a 24-month change interval and no listed check interval, distinguishing them from later configurations.
- Starting with the 2012-2017 base GranCabrio, a 20,000 km check interval was introduced alongside the existing 24-month change interval, adding a distance-based inspection point not present in earlier model years.
- The 2018-2020 GranCabrio retains the same specification structure as the 2012-2017 model, with a 1-liter capacity, a 20,000 km check interval, and a 24-month change interval under normal use conditions.
- The GranCabrio MC (2012-2014) shares the simpler specification format of the earliest base model, listing only a 1-liter capacity and a 24-month change interval without a separate check interval.
- The presence of both a check interval and a change interval in the 2012-2017 and 2018-2020 configurations indicates a two-stage service approach, where fluid condition is assessed at 20,000 km increments while full replacement occurs on a fixed 24-month cycle.