Lifan 720

Coolant capacity & service interval

Lifan 720 coolant capacity ranges from 2.4 to 3 liters. Service intervals include checks at 3000 km or 3 months, and changes at 10000 km or 12 months and 15000 km or 15 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
720 1.5, LF7158 (2013- )
  • Use: Normal
  • Capacity 2,4-3 liter
  • Change 10000 km/ 12 months
720 1.5, LF7158 (2013- )
  • Use: Initial service
  • Capacity 2,4-3 liter
  • Check 3000 km/ 3 months
  • Change 15000 km/ 15 months
720 1.8, LF7185 (2013- )
  • Use: Normal
  • Capacity 2,4-3 liter
  • Change 10000 km/ 12 months
720 1.8, LF7185 (2013- )
  • Use: Initial service
  • Capacity 2,4-3 liter
  • Check 3000 km/ 3 months
  • Change 15000 km/ 15 months

Additional Notes

  • The Lifan 720 cooling system capacity is listed as a range of 2.4 to 3 liters across both the 1.5 LF7158 and 1.8 LF7185 engine variants, reflecting a service fill volume rather than a fixed single value, which accounts for variation in residual fluid retained during a drain.
  • Under normal use conditions, the coolant change interval for both engine variants is set at 10,000 km or 12 months, whichever comes first, applying a dual-trigger approach where either the distance or the time threshold is sufficient to prompt a change.
  • The initial service condition carries a distinct check interval of 3,000 km or 3 months, separate from the change interval, indicating an early inspection point intended to verify coolant condition before the first scheduled replacement.
  • Under initial service conditions, the first coolant change is extended to 15,000 km or 15 months, which is longer than the 10,000 km or 12-month interval applied under normal use, reflecting a break-in period protocol for new vehicles.
  • Both the 1.5 LF7158 and 1.8 LF7185 engines share identical capacity figures and interval schedules for both normal and initial service conditions, with no differentiation in cooling system specifications between the two displacements starting from 2013.

Other Systems