Lexus IS, XE10 (USA / CAN)
Coolant capacity & service interval
Lexus IS, XE10 (USA / CAN) coolant capacity is 7,5 liters. Service intervals include checks at 8000 km, 15000 miles/12 months, and 15000 miles/18 months, plus changes at 32000 km, 48000 km, 64000 km, 30000 miles/24 months, 50000 miles/60 months, and 100000 miles/120 months. The data covers 7 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| IS 300 (CAN) (2003-2005) |
|
| IS 300 (USA) (2003-2005) |
|
| IS 300 (USA) (2003-2005) |
|
| IS 300 (CAN) (2002-2003) |
|
| IS 300 (USA) (2002-2003) |
|
| IS 300 (CAN) (2001-2002) |
|
| IS 300 (USA) (2001-2002) |
|
Additional Notes
- The cooling system capacity across all Lexus IS 300 configurations, both USA and CAN markets, is 7.5 liters. A consistent capacity across market variants typically reflects a shared engine and cooling circuit architecture rather than region-specific hardware differences.
- Canadian market intervals shifted across three distinct model year groupings. The 2001-2002 specification calls for a coolant change at 48,000 km, while the 2002-2003 grouping reduces that interval to 32,000 km, and the 2003-2005 grouping extends it significantly to 64,000 km. All three groupings share the same 8,000 km check interval.
- The US market 2001-2002 and 2002-2003 specifications carry identical service intervals: a check every 15,000 miles or 12 months and a coolant change every 30,000 miles or 24 months. The shared interval across two consecutive model year groupings indicates no service schedule revision was applied between those periods for the US market.
- For the US market 2003-2005 grouping, the standard change interval extends to 50,000 miles or 60 months under normal use conditions, compared to the 30,000-mile interval of the preceding years. The check interval also lengthens from 12 months to 18 months.
- A separate "first change only" specification applies to the US market 2003-2005 IS 300. Under that condition, the change interval is listed at 100,000 miles or 120 months. A first-change-only designation typically applies to factory-fill coolant, which may have a longer service life than subsequent refills due to its formulation or additive package at the time of manufacture.
- The Canadian market uses kilometer and distance-only intervals, while the US market intervals are expressed as both a mileage figure and a time-based limit. The time component in US specifications means the coolant change is due at whichever threshold, distance or elapsed time, is reached first.