Land Rover Range Rover, L460 (USA)
Transfer case fluid capacity & service interval
The Land Rover Range Rover L460 (USA) uses transfer case fluid with a capacity of 1.25 liters. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Range Rover P550e (2023- ) |
|
| Range Rover P615 4.4 V8 Twinturbo (2023- ) |
|
| Range Rover P400 3.0 MHEV (2022- ) |
|
| Range Rover P440e (2022-2023) |
|
| Range Rover P530 4.4 V8 Twinturbo (2022- ) |
|
Additional Notes
- The Land Rover Range Rover L460 (USA) transfer case fluid capacity is 1.25 liters across all listed configurations, which is a relatively modest fill volume consistent with a sealed transfer box unit rather than a larger, separately serviced gearbox assembly.
- The P400 3.0 MHEV, a mild hybrid petrol inline-six variant, carries the same 1.25-liter transfer box capacity as the V8 and plug-in hybrid configurations, indicating a shared transfer case unit across powertrain families in the L460 generation.
- Both plug-in hybrid variants, the P440e and the P550e, share the 1.25-liter transfer box fill specification with the purely combustion-powered models, meaning the electrified drivetrain architecture does not alter the transfer case fluid requirement.
- The P530 and P615 are both 4.4 V8 twin-turbocharged engines, with the P615 representing a higher output tune introduced from 2023. Despite the power difference between the two, the transfer box fluid capacity remains at 1.25 liters for both.
- All five configurations specify normal use conditions for the transfer box service, meaning the 1.25-liter capacity figure applies to standard operating environments rather than severe-duty or off-road-intensive service cycles.
- The P550e is listed with a 2023 start year, making the transfer box capacity specification for that variant applicable from the 2023 model year onward within the covered range.