Land Rover LR2, L359 (USA)

Brake fluid capacity & service interval

Land Rover LR2, L359 (USA) models utilize brake fluid with a capacity range between min and max. Service intervals include checks at 10000 miles/ 12 months or 15000 miles/ 12 months, and a fluid change at 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
LR2 2.0 Si4 (2012-2015)
  • Use: Normal
  • Between min and max.
  • Check 10000 miles/ 12 months
  • Change 36 months
LR2 3.2 i6 (2007-2012)
  • Use: Normal
  • Between min and max.
  • Check 15000 miles/ 12 months
  • Change 36 months

Additional Notes

  • The Land Rover LR2 L359 (USA) brake fluid specifications cover two distinct engine configurations, each carrying its own service check interval despite sharing the same 36-month change interval.
  • The LR2 2.0 Si4 (2012-2015) applies its brake fluid specification to the hydraulic brake and clutch system combined, reflecting the presence of a hydraulically actuated clutch alongside the braking circuit.
  • The LR2 3.2 i6 (2007-2012) applies its brake fluid specification to the hydraulic brake system only, with no clutch circuit referenced in the note.
  • Fluid level for both configurations is expressed as a range between a minimum and maximum mark rather than a fixed volume, which is standard practice for brake fluid reservoirs where a precise fill quantity is not specified for routine service.
  • The LR2 2.0 Si4 carries a check interval of 10,000 miles or 12 months under normal use conditions, while the LR2 3.2 i6 carries a longer check interval of 15,000 miles or 12 months under the same use conditions.
  • Both configurations share a 36-month change interval under normal use conditions, meaning brake fluid replacement is time-based rather than mileage-based for scheduled service purposes.

Other Systems