Land Rover Discovery, L462 (USA)
Brake fluid capacity & service interval
Land Rover Discovery, L462 (USA) models utilize brake fluid with a capacity of 0,9 liter. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Discovery P300 2.0 (2020- ) |
|
| Discovery P360 3.0 MHEV (2020- ) |
|
| Discovery 3.0 TDV6 (190 kW) (2016-2020) |
|
| Discovery 3.0 TDV6 DPF (190 kW) (2016-2020) |
|
| Discovery 3.0 V6 Supercharged (2016-2020) |
|
Additional Notes
- The Land Rover Discovery L462 (USA) brake fluid specifications cover the hydraulic brake system across all listed configurations, with service fill measured between the reservoir's minimum and maximum markers on most variants.
- The 3.0 TDV6 (190 kW), 3.0 TDV6 DPF (190 kW), and 3.0 V6 Supercharged variants spanning 2016-2020 share the same "between min and max" fill specification, meaning no fixed volume is stated and the reservoir level serves as the sole fill reference.
- A "between min and max" specification is typical for brake fluid top-ups, where the hydraulic reservoir is inspected visually rather than drained and refilled to a measured capacity.
- The Discovery P300 2.0 and P360 3.0 MHEV, both introduced from 2020, carry an explicit brake fluid capacity of 0.9 liter, which represents a defined system volume rather than a visual range reference.
- The shift from a min-to-max range specification on the 2016-2020 variants to a fixed 0.9-liter figure on the P300 and P360 reflects a difference in how the service data is expressed between the two generations of configurations.
- All five configurations list normal use conditions, meaning the hydraulic brake system service specifications are not adjusted for severe operating environments in the data provided.