Lancia Y10
Manual transmission fluid capacity & service interval
Lancia Y10 manual transmission fluid has a capacity of 2,4 liters. Service intervals include checking every 20000 km and changing every 40000 km or 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Y 10 fire (1986-1988) |
|
| Y 10 touring (1986-1988) |
|
| Y 10 turbo (1986-1988) |
|
Additional Notes
- The Lancia Y10's manual transmission is configured as a transaxle unit, meaning the gearbox and final drive share a common housing and a single fluid fill.
- All three variants covered here — the Fire, Touring, and Turbo — share an identical transaxle fluid capacity of 2.4 liters across the 1986-1988 model years.
- A 2.4-liter figure for a transaxle of a small supermini is consistent with a combined gearbox and differential sump, rather than separate fills for each component.
- The fluid check interval is set at 20,000 km under normal use conditions, which serves as a mid-cycle inspection point before the full drain-and-fill service falls due.
- The change interval is specified at 40,000 km or 24 months, whichever comes first, meaning time elapsed can trigger a fluid change independently of distance traveled.
- The 24-month time limit alongside the 40,000 km distance threshold reflects that fluid degradation occurs through oxidation and moisture absorption over time, not solely through mechanical wear cycles.
- All three trim levels — Fire, Touring, and Turbo — carry the same check and change intervals, indicating no differentiation in service scheduling between the naturally aspirated and turbocharged configurations for this system.