Lamborghini Veneno

Differential fluid capacity & service interval

Lamborghini Veneno differential fluid capacity ranges from 0,8 to 2 liters. Service intervals include checks at 15000 km and changes at 2500 km or 30000 km/24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Veneno (2013-2015)
  • Front
  • Use: Normal
  • Capacity 0,8 liter
  • Check 15000 km
  • Change 30000 km/ 24 months
  • Veneno (2013-2015)
  • Front
  • Use: First change only
  • Capacity 0,8 liter
  • Change 2500 km
  • Veneno (2013-2015)
  • Rear
  • Use: Normal
  • Capacity 2 liter (Dry fill)
  • Capacity 1,3 liter (Service fill)
  • Check 15000 km
  • Change 30000 km/ 24 months
  • Veneno (2013-2015)
  • Rear
  • Use: First change only
  • Capacity 2 liter (Dry fill)
  • Capacity 1,3 liter (Service fill)
  • Change 2500 km

Additional Notes

  • The front differential on the Lamborghini Veneno holds 0.8 liter of fluid, a figure that applies equally to both a normal service fill and the first-change-only interval, indicating no distinction between dry and service fill volumes for that unit.
  • The rear differential carries two separate capacity values: a dry fill of 2 liters and a service fill of 1.3 liters. The dry fill figure represents the total volume required when the unit is completely empty, such as after a rebuild or replacement, while the service fill reflects the smaller amount needed when some residual fluid remains after a drain.
  • Under normal use conditions, the front differential fluid is subject to a check interval of 15,000 km and a change interval of 30,000 km or 24 months, whichever comes first.
  • The rear differential follows the same normal-use check and change schedule as the front: inspection at 15,000 km and fluid replacement at 30,000 km or every 24 months.
  • Both the front and rear differentials share a first-change-only interval set at 2,500 km. A first-change-only interval is typically applied to new or rebuilt components to flush out metal particles and manufacturing residues that accumulate during initial break-in operation.
  • The 24-month time limit paired with the 30,000 km change interval on both differentials means fluid age alone can trigger a required change, independent of distance traveled.

Other Systems