Kia Stonic, YB/CUV (EU)
Clutch fluid capacity & service interval
Kia Stonic, YB/CUV (EU) models utilize clutch fluid with a capacity range between min and max. Service intervals include checks at 15000 km/ 12 months and changes at 30000 km/ 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Stonic 1.0 T-GDi (74 kW) (2024- ) |
|
| Stonic 1.0 T-GDI (74 kW) MHEV (2024- ) |
|
| Stonic 1.0 T-GDi (74 kW) (2020-2024) |
|
| Stonic 1.0 T-GDI (88 kW) MHEV (2020-2024) |
|
Additional Notes
- All four configurations in the Kia Stonic YB/CUV (EU) specify a hydraulic clutch system, meaning clutch actuation is fluid-based rather than mechanical cable-operated.
- No fixed volume figure is listed for any configuration. The capacity specification is expressed as a level range between the minimum and maximum marks on the reservoir, which is standard for hydraulic clutch fluid servicing without a full system drain.
- The check interval across all configurations is 15,000 km or 12 months under normal use conditions, whichever comes first.
- The change interval is set at 30,000 km or 24 months under normal use conditions, meaning a full fluid replacement is due at twice the distance and time of a routine level check.
- The 1.0 T-GDI (88 kW) MHEV variant covering 2020-2024 shares identical check and change intervals with the non-hybrid 1.0 T-GDi (74 kW) covering the same model years, despite the difference in output and mild hybrid architecture.
- The 1.0 T-GDI (74 kW) MHEV introduced from 2024 onward carries the same 15,000 km/12-month check and 30,000 km/24-month change schedule as all other listed configurations.