Kia Rondo, RP (USA / CAN)

Coolant capacity & service interval

Kia Rondo, RP (USA / CAN) uses coolant with a capacity range of 6 to 6,3 liters. Service intervals include 30000 miles or 24 months and 120000 miles or 120 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Rondo 2.0 GDI (CAN) (2017-2018)
  • Use: Normal
  • Capacity 6 liter
  • Change 30000 miles/ 24 months
Rondo 2.0 GDI (CAN) (2017-2018)
  • Use: First change only
  • Capacity 6 liter
  • Change 120000 miles/ 120 months
Rondo 2.0 GDI (CAN) (2013-2016)
  • Use: Normal
  • Capacity 6 liter (with automatic transaxle)
  • Capacity 6,3 liter (with manual transaxle)
  • Change 30000 miles/ 24 months
Rondo 2.0 GDI (CAN) (2013-2016)
  • Use: First change only
  • Capacity 6 liter (with automatic transaxle)
  • Capacity 6,3 liter (with manual transaxle)
  • Change 120000 miles/ 120 months

Additional Notes

  • The Kia Rondo RP 2.0 GDI (CAN) for 2013-2016 carries a cooling system capacity of 6.0 liters when paired with an automatic transaxle, rising to 6.3 liters when paired with a manual transaxle. The difference reflects the additional coolant volume routed through or around the manual transaxle cooling circuit.
  • For the 2017-2018 Rondo 2.0 GDI (CAN), the cooling system capacity is listed at a single value of 6.0 liters, with no separate figure for a manual transaxle variant as seen in the 2013-2016 specifications.
  • Across all covered model years, the normal-use coolant change interval is 30,000 miles or 24 months, whichever comes first. A 24-month interval means coolant is replaced roughly every two years under standard operating conditions.
  • A separate first-change-only interval of 120,000 miles or 120 months applies to both the 2013-2016 and 2017-2018 Rondo 2.0 GDI (CAN) configurations. A first-change-only designation means the extended interval governs only the initial factory fill before the standard recurring schedule takes over.
  • The 120-month first-change-only interval equals 10 years, which is consistent with long-life coolant formulations that are designed to maintain corrosion inhibitor effectiveness over an extended initial service period before requiring more frequent replacement.

Other Systems