Kia Rio, UB (USA / CAN)
Manual transmission fluid capacity & service interval
Kia Rio, UB (USA / CAN) manual transmission fluid capacity ranges from 1,6 to 1,9 liters. Service intervals include checks at 37500 miles or 30 to 48 months, and fluid changes at 75000 to 80000 miles. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rio 1.6 (2015-2017) |
|
| Rio 1.6 (2015-2017) |
|
| Rio 1.6 (2011-2015) |
|
| Rio 1.6 (2011-2015) |
|
Additional Notes
- The Kia Rio UB 1.6 manual transaxle carries a fluid capacity of 1.8-1.9 liters for the 2011-2015 model years, while the 2015-2017 variant uses a slightly smaller 1.6-1.7 liter fill. The capacity range in both cases reflects acceptable variation between a drain-and-refill service fill and a fully topped-off state.
- For the 2011-2015 Rio 1.6 manual transaxle under normal use conditions, the specification calls for a fluid check at 37,500 miles or 48 months, with no fluid change interval listed for normal use.
- Under severe use conditions for the 2011-2015 Rio 1.6 manual transaxle, a fluid change is specified at 80,000 miles, in addition to the same 37,500-mile or 48-month check interval shared with the normal use schedule.
- The 2015-2017 Rio 1.6 manual transaxle under normal use conditions carries a check interval of 37,500 miles or 30 months, which is a shorter time-based interval than the 48-month period specified for the 2011-2015 configuration at the same mileage threshold.
- Under severe use conditions, the 2015-2017 Rio 1.6 manual transaxle specifies a fluid change at 75,000 miles, which is 5,000 miles shorter than the 80,000-mile change interval listed for the 2011-2015 severe use schedule.
- Both the 2011-2015 and 2015-2017 Rio 1.6 manual transaxle specifications present capacity as a range rather than a fixed value, which is standard practice for manual transmission fluid fills where the exact quantity retained can vary slightly depending on the drain angle and refill method.