Kia Forte, YD (USA / CAN)

Brake fluid capacity & service interval

Kia Forte, YD (USA / CAN) requires brake fluid with a capacity of 0,7-0,8 liter. Service intervals consist of a check every 30000 miles or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Forte 1.6 T-GDI (2015-2016)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Forte 1.8 MPI (2015-2016)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Forte 1.6 T-GDI (USA) (2013-2014)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Forte 1.8 MPI (2013-2014)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Forte 2.0 GDI (2013-2016)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months

Additional Notes

  • The Kia Forte YD brake fluid capacity is listed as a range of 0.7–0.8 liter across all engine configurations covered in the 2013-2016 model years, which is consistent with a service fill rather than a full system overhaul figure.
  • A capacity expressed as a range rather than a fixed value typically reflects normal variation in reservoir level between the minimum and maximum marks, meaning both figures represent acceptable operating volumes within the hydraulic brake and clutch system.
  • The 1.6 T-GDI, 1.8 MPI, and 2.0 GDI engine variants all share the identical 0.7–0.8 liter capacity specification, indicating no meaningful difference in brake fluid reservoir sizing across the engine lineup for the YD generation.
  • The check interval for all listed configurations is 30,000 miles or 24 months under normal use conditions, whichever comes first, meaning time elapsed and distance driven are both valid triggers for a fluid inspection.
  • The 1.6 T-GDI carries a separate entry for the USA market covering 2013-2014, alongside a general entry for 2015-2016, yet both entries carry the same 0.7–0.8 liter capacity and 30,000-mile/24-month check interval.
  • The note designating the hydraulic brake and clutch system applies to all rows, which reflects the shared fluid reservoir arrangement common in vehicles where the clutch master cylinder draws from the same brake fluid supply.
  • The 2.0 GDI specification spans the full 2013-2016 range in a single entry, while the 1.6 T-GDI and 1.8 MPI entries are each divided into two separate year-group rows, though all carry identical capacity and interval values.

Other Systems