Kia Cerato / Forte, TD (EU)

Brake fluid capacity & service interval

Kia Cerato / Forte, TD (EU) uses brake fluid with a capacity of 0,8 liter. Service intervals include checks every 15000 km or 12 months and changes every 30000 km or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cerato / Forte 1.6 (2011-2013)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 15000 km/ 12 months
  • Change 30000 km/ 24 months
Cerato / Forte 2.0 (2011-2013)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 15000 km/ 12 months
  • Change 30000 km/ 24 months
Cerato / Forte 1.6 (2009-2010)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 15000 km/ 12 months
  • Change 30000 km/ 24 months
Cerato / Forte 2.0 (2009-2010)
  • Use: Normal
  • Capacity 0,8 liter
  • Check 15000 km/ 12 months
  • Change 30000 km/ 24 months

Additional Notes

  • The Kia Cerato / Forte TD (EU) brake fluid capacity is listed at 0.8 liter across all four configurations, covering both the 1.6 and 2.0 engine variants for the 2009-2013 period. A capacity figure at this scale reflects the total volume of the hydraulic brake and clutch system rather than a partial service fill.
  • All configurations share a check interval of every 15,000 km or 12 months, whichever comes first, under normal use conditions. A 12-month maximum interval on fluid checks reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and can lower its boiling point.
  • The change interval across all listed configurations is set at 30,000 km or 24 months under normal use. A 24-month replacement cycle is a widely recognized standard for brake fluid, as moisture absorption over two years is generally considered sufficient to warrant a full system flush regardless of mileage.
  • The check interval of 15,000 km sits at exactly half the 30,000 km change interval, meaning one intermediate inspection falls between each scheduled fluid replacement. Under normal use, no shortened interval is specified for either the 1.6 or 2.0 engine variants.
  • The specifications note that the 0.8 liter capacity applies to the hydraulic brake and clutch system combined. On vehicles where the clutch shares hydraulic fluid with the braking circuit, a single reservoir serves both functions, which accounts for the unified capacity figure.
  • No variation in capacity or service intervals exists between the 2009-2010 and 2011-2013 model year groups for either engine size. Both the 1.6 and 2.0 variants carry identical 0.8 liter capacities and the same check and change schedules across the full 2009-2013 span.

Other Systems