Kia Cadenza, YG (EU)

Automatic transmission fluid capacity & service interval

Kia Cadenza, YG (EU) automatic transmission fluid capacity ranges from 7 to 7,8 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cadenza 3.3 GDI (2016-2018)
  • Use: Normal
  • Capacity 7 liter
  • Code: A8LF1 8/1
Cadenza 3.3 MPI (2016-2018)
  • Use: Normal
  • Capacity 7,8 liter
  • Code: A6LF1 6/1

Additional Notes

  • The Kia Cadenza YG (EU) automatic transaxle fluid capacity differs between the two available engine variants, with the 3.3 GDI requiring 7 liters and the 3.3 MPI requiring 7.8 liters for the 2016-2018 model years.
  • A transaxle combines the transmission and drive axle into a single integrated unit, and the fluid capacity figures listed here represent the total fill volume for that assembly.
  • The 3.3 MPI variant holds 0.8 liters more automatic transmission fluid than the 3.3 GDI variant, a difference that reflects the distinct internal architecture between the two engine and transaxle pairings despite sharing the same displacement figure.
  • Both configurations carry a normal use condition designation, meaning the listed 7-liter and 7.8-liter capacities apply under standard operating conditions rather than severe or heavy-duty service cycles.
  • No service interval mileage or time value is specified for either configuration, so the capacity figures stand as the primary service reference data available for both the 3.3 GDI and 3.3 MPI transaxle fills.

Other Systems