Jeep Wrangler, JL (EU)

Manual transmission fluid capacity & service interval

Jeep Wrangler, JL (EU) manual transmission fluid capacity is 2,25 liters. The service interval is 30000 miles or 36 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Wrangler 3.6 (2017-2023)
  • Use: Normal
  • Capacity 2,25 liter (Dry fill)
  • Code: AL6 6/1
Wrangler 3.6 (2017-2023)
  • Use: Severe
  • Capacity 2,25 liter (Dry fill)
  • Change 30000 miles/ 36 months
  • Code: AL6 6/1

Additional Notes

  • The Jeep Wrangler JL (EU) 3.6 carries a manual transmission fluid capacity of 2.25 liters, and the dry fill designation means the figure applies to a fully drained or new transmission assembly rather than a partial top-up during routine service.
  • The 2.25-liter dry fill capacity remains consistent across both the normal and severe use conditions listed for the 3.6 engine, covering the 2017-2023 model years.
  • A change interval of 30,000 miles or 36 months is specified under severe use conditions for the 3.6 manual transmission, while no corresponding mileage or time interval appears under the normal use condition.
  • The 30,000-mile or 36-month interval tied to severe use reflects a more demanding operating environment, where heat, load, and stop-and-go cycling accelerate fluid degradation compared to standard driving conditions.

Other Systems